参考文献
[1] Hashimoto K.In pursuit of new corrosion⁃resistant alloys[J].Corrosion, 2002, 58(9): 715⁃722.
[2] Pang S J, Zhang T, Asami K, et al.Bulk glassy Fe⁃Cr⁃Mo⁃C⁃B alloys with high corrosion resistance[J].Corrosion Science, 2002, 44(8): 1847⁃1856.
[3] IM B M, Akiyama E, Habzaki H, et al.The corrosion behavior of amorphous Fe⁃8Cr⁃13P⁃7C and Fe⁃8Cr⁃20P alloys in concentrated sulfuric acid[J].Corrosion Science, 1994, 36(9): 1537⁃1550.
[4] Farmer J C, Chol J S, Saw C, et al.Iron⁃based amorphous metals: High⁃performance corrosion⁃resistant material development[J].Metallurgical and Materials Transactions A, 2009, 40(6):1289⁃1305.
[5] Asami K, Naka M, Hashimoto K, et al.Effect of molybdenum on the anodic behavior of amorphous Fe⁃Cr⁃Mo⁃B alloys in hydrochloric⁃acid[J].Journal of The Electrochemical Society, 1980, 127(10): 2130⁃2138.
[6] Szewieczek D, Baron A.Electrochemical corrosion properties of amorphous Fe78Si13B9 alloy[J].Journal of Materials Processing Technology, 2004, 157⁃158: 442⁃445 .
[7] Wang S L, Yi S.The corrosion behaviors of Fe⁃based bulk metallic glasses in a sulfuric solution at 70℃[J].Intermetallics, 2010, 18(10):1950⁃1953.
[8] Pardo A, Merino M C, Otero E, et al.Influence of Cr additions on corrosion resistance of Fe⁃ and Co⁃based metallic glasses and nanocrystals in H2SO4[J].Journal of Non⁃crystalline Solids, 2006, 352(30⁃31): 3179⁃3190.
[9] Varga K, Baradlai P, Bernard W O, et al.Comparative study of surface properties of austenitic stainless steels in sulphuric and hydrochloric acid solutions[J].Electrochimica Acta, 1997, 42(1): 25⁃35.
[10] Chakravortty M, Paramguru R K, Jena P K.Electrochemical dissolution of nichrome in sulphuric acid[J].Hydrometallurgy, 2001, 59(1): 45⁃54.
[11] Souza C A C, Kuri S E, Politti F S, et al.Corrosion resistance of amorphous and polycrystalline FeCuNbSiB alloys in sulphuric acid solution[J].Journal of Non⁃Crystalline Solids, 1999, 247(1⁃3): 69⁃73.
[12] Burstein G T, Liu C, Souto R M, et al.Origins of pitting corrosion[J].Corrosion Engineering Science and Technology, 2004, 39(1): 25⁃30.
[13] Liu D Y, Chang T C.Influence of Si content on the intergranular corrosion of SUS 309L stainless steels[J].Materials Science and Engineering A, 2003, 359(1⁃2): 396⁃401.
[14] Szklarska⁃Smialowska Z.Pitting corrosion of aluminium[J].Corrosion Science, 1999, 41(9): 1743⁃1767.
[15] Martini E M A, Muller I L.Characterization of the film formed on iron in borate solution by electrochemical impedance spectroscopy[J].Corrosion Science, 2000, 42(3): 443⁃454.
[16] Wang Z M,Ma Y T, Zhang J, et al.Influence of yttrium as a minority alloying element on the corrosion behavior in Fe⁃based bulk metallic glasses[J].Electrochimica Acta, 2008, 54(2): 261⁃269.
[17] Hannani A, Kermiche F, Pourbaix A, et al.Characterisation of passive film on AISI304 stainless steel[J].The International Journal of Surface Engineering and Coatings, 1997, 75(1): 7⁃9 .
[18] Garrigues L, Pebere N, Dabosi F.An investigation of the corrosion inhibition of pure aluminum in neutral and acidic chloride solutions[J].Electrochimica Acta, 1996, 41(7⁃8): 1209⁃1215.
[19] Bogar F D, Foley R T.The influence of chloride ion on the pitting of aluminum[J].Journal of the Electrochemical Society, 1972, 119(4): 462⁃464.
[20] Kuo H C, Nobe K.Electrodissolution kinetics of iron in chloride solution Ⅵ.Concentrated acidic solutions[J].Journal of The Electrochemical Society, 1978, 9(37): 853⁃860.
[21] McCafferty E, Hackerman N.Kinetics of iron corrosion in concentrated acidic chloride solutions[J].Journal of The Electrochemical Society, 1972, 119(8): 999⁃1009.
[22] Majima H, Awakura Y, Kawasaki Y.Analysis of dissolution rate of metal oxide in acidic chloride solution in terms of water acitivity[J].Metallurgical and Materials Transactions B, 1988, 19(3): 505⁃507.
[23] Bjornkvist L, Olefjord I.The electrochemistry of chromium in acidic chloride solutions: anodic dissolution and passivation[J].Corrosion Science, 1991, 32: 231⁃242.
[24] Bessone J, Karakaya L, Lorbeer P, et al.The Kinetics of iron dissolution and passivation[J].Electrochimica Acta, 1978, 9(1): 1147⁃1154.
[25] Ahn S J, Kwon H S.Effects of solution temperature on electronic properties of passive film formed on Fe in pH 8.5 borate buffer solution[J].Electrochimica Acta, 2004, 49(20): 3347⁃3353.
[26] Cheng Y F, Luo J L.A comparison of the pitting susceptibility and semiconducting properties of the passive films on carbon steel in chromate and bicarbonate solutions[J].Applied Surface Science, 2000, 167(1⁃2): 113⁃121.
[27] Ahn S J, Kwon H S.Effects of solution temperature on electronic properties of passive film formed on Fe in pH 8.5 borate buffer solution[J].Electrochimica Acta, 2004, 49(20): 3347⁃3353.
[28] Macdonald D D.The point defect model for the passive state[J].Journal of The Electrochemical Society, 1992, 139(12): 3434⁃3449.
[29] Cheng Y F,Luo J L.Passivity and pitting of carbon steel in chromate solutions[J].Electrochimica Acta, 1999, 44(26): 4795⁃4804.
[30] Keddam M, Mattos O R, Takenouti H.Mechanism of anodic dissolution of iron⁃chromium alloys investigated by electrode impedances⁃I[J].Experimental results and reaction model.Electrochimica Acta, 1986, 31(9): 1147⁃1158.
[31] Maurice V, Yang W P, Marcus P.XPS and STM study of passive films formed on Fe⁃22Cr(110) single⁃crystal surfaces[J].Journal of The Electrochemical Society, 1996, 143(4): 1182⁃1200.
[32] Keller P, Strehblow H H.XPS investigations of electrochemically formed passive layers on Fe/Cr⁃alloys in 0.5M H2SO4[J].Corrosion Science, 2004, 46(8): 1939⁃1952.
[33] Brooks A R, Clayton C R, Doss K, et al.On the role of Cr in the passivity of stainless steel[J].Journal of The Electrochemical Society, 1986, 133(12): 2459⁃2464.
[34] Lu Y C, Clayton Y C, Brooks A R.A bipolar model of the passivity of stainless steels⁃Ⅱ.The influence of aqueous molybdate[J].Corrosion Science, 1989, 29(7): 863⁃880.
[35] Kannan S, Balamurugan A, Rajeswari S.H2SO4 as a passivating medium on the localised corrosion resistance of surgical 316L SS metallic implant and its effect on hydroxyapatite coatings[J].Electrochimica Acta, 2004, 49(15): 2395⁃2403.
[36] Sugimoto K, Sawada Y.The role of molybdenum additions to austenitic stainless steels in the inhibition of pitting in acid chloride solutions[J].Corrosion Science, 1977, 17(5): 425⁃445.
[37] Tan M⁃W, Akiyama E, Kawashima A, et al.The effect of air exposure on the corrosion behavior of amorphous Fe⁃8Cr⁃Mo⁃13P⁃7C alloys in 1M HCl[J].Corrosion Science, 1995, 37(8): 1289⁃1301.
[38] Clayton C R, Lu Y C.A bipolar model of the passivity of stainless steels⁃Ⅲ.The mechanism of MoO42⁃formation and incorporation[J].Corrosion Science, 1989, 29(7): 881⁃891.
[39] Lu Y C, Clayton C R.An XPS study of the passive and transpassive behavior of Mo in deaerated 0.1M HCl[J].Corrosion Science, 1989, 29(8): 927⁃937.
[40] Asami K, Naka M, Hashimoto K, et al.Effect of molybdenum on the anodic behavior of amorphous Fe⁃Cr⁃Mo⁃B alloys in hydrochloric⁃acid[J].Journal of The Electrochemical Society, 1980, 127(10): 2130⁃2138.
[41] Badawy W A, Al⁃Kharafi F M.Corrosion and passivation behaviors of molybdenum in aqueous solutions of different pH[J].Electrochimica Acta,1998, 44(4): 693⁃702.
[42] Sato N, Noda T, Kudo K.Thickness and structure of passive films on iron in acidic and basic solution[J].Electrochimica Acta, 1974, 19(8): 471⁃475.
[43] Wang Z M, Ma Y T, Zhang J, et al.Influence of yttrium as a minority alloying element on the corrosion behavior in Fe⁃based bulk metallic glasses[J].Electrochimica Acta, 2008, 54(2): 261⁃269.
[44] Bojinov M, Fabricius G, Laitinen T, et al.The mechanism of transpassive dissolution of Chromium in H2SO4 solutions[J].Journal of The Electrochemical Society, 1998, 145(6): 2043⁃2050.
[45] Devine T M.Anodic polarization and localized corrosion behavior of amorphous Ni35Fe30Cr15P14B6 in near⁃neutral and HCl solutions[J].Journal of The Electrochemical Society, 1977, 8(15): 38⁃42.
[46] Wang Y, Zheng Y G, Ke W, et al.Slurry erosion⁃corrosion behaviour of high⁃velocity oxy⁃fuel (HVOF) sprayed Fe⁃based amorphous metallic coatings for marine pump in sand⁃containing NaCl solutions[J].Corrosion Science, 2011, 53(10): 3177⁃3185.
[47] Bojinov M, Fabricius G, Laitinen T, et al.Conduction mechanism of the anodic film on chromium in acidic sulphate solutions[J].Electrochimica Acta, 1998, 44(2): 247⁃261.
[48] Seo M, Saito R, Sato N.Ellipsometry and Auger analysis of chromium surfaces passivated in acidic and neutral aqueous solutions[J].Journal of The Electrochemical Society, 1980,127(9): 1909⁃1912.
[49] Hara N, Sugimoto K.The study of the passivation films on Fe⁃Cr alloys by modulation spectroscopy[J].Journal of The Electrochemical Society, 1979, 126(8): 1328⁃1334.
[50] Moffat T P, Latanision R M.An electrochemical and X⁃Ray photoelectron spectroscopy study of the passive state of chromium[J].Journal of The Electrochemical Society, 1992, 23(43): 1869⁃1879.
[51] El⁃Aziz A M, Hoyer R, Kibler L A, et al.Potential of zero free charge of Pd overlayers on Pt(111) [J].Electrochimica Acta, 2006, 51(12): 2518⁃2522.
[52] McCafferty E.Relationship between the isoelectric point (pHpzc) and the potential of zero charge (Epzc) for passive metals[J].Electrochimica Acta, 2010, 55(5): 1630⁃1637.
[53] Jones R L, Stewart J.The kinetics of corrosion of e⁃glass fibres in sulphuric acid[J].Journal of Non⁃Crystalline Solids, 2010, 356(44): 2433⁃2436.
[54] Hermas A A, Morad M S.A comparative study on the corrosion behaviour of 304 austenitic stainless steel in sulfamic and sulfuric acid solutions[J].Corrosion Science, 2008, 50(9): 2710⁃2717.
[55] Ameer M A, Fekry A M, Heakal F E.Electrochemical behaviour of passive films on molybdenum⁃containing austenitic stainless steels in aqueous solutions[J].Electrochimica Acta, 2004, 50(1): 43⁃49.
[56] Shen C B, Wang S G, Yang H Y, et al.Corrosion effect of allylthiourea on bulk nanocrystalline ingot iron in diluted acidic sulphate solution[J].Electrochimica Acta, 2007, 52(12): 3950⁃3957.
[57] Shankar Rao V, Baligidad R G, Raja V S.Effect of carbon on corrosion behaviour of Fe3Al intermetallics in 0.5N sulphuric acid[J].Corrosion Science, 2002, 44(3): 521⁃533.
[58] Kellou F, Benchettara A, Amara S.Temperature and microstructure effects on corrosion behavior of annealed Fe⁃xTi⁃yC alloys in sulphuric acid solution[J].Materials Chemistry and Physics, 2007, 106(2⁃3): 198⁃208.
[59] Pagitsas M, Diamantopoulou A, Sazou D.General and pitting corrosion deduced from current oscillations in the passive/active transition state of the Fe/H2SO4 electrochemical system[J].Electrochimica Acta, 2002, 47(26): 4163⁃4179.
[60] Burstein G T, Souto R M.Observations of localised instability of passive titanium in chloride solution[J].Electrochimica Acta, 1995, 40(12): 1881⁃1888.
[61] Liu L, Li Y, Wang F H.Influence of grain size on the corrosion behavior of a Ni⁃based superalloy nanocrystalline coating in NaCl acidic solution[J].Electrochimica Acta, 2008, 53(5): 2453⁃2462.
[62] Pistorius P C, Burstein G T.Growth of corrosion pits on stainless steel in chloride solution containing dilute sulphate[J].Corrosion Science, 1992, 33: 1885⁃1897.
[63] Darwish N A, Hilbert F, Lorenz W J, et al.The influence of chloride ions on the kinetics of iron dissolution[J].Electrochimica Acta, 1973, 18(6): 421⁃425.
[64] Cheng Y F, Luo J L, Wilmott M.Spectral analysis of electrochemical noise with different transient shapes[J].Electrochimica Acta, 2000, 45(11): 1763⁃1771.
[65] Sugimoto K, Sawada Y.The role of molybdenum additions to austenitic stainless steels in the inhibition of pitting in acid chloride solutions[J].Corrosion Science, 1977, 17(5): 425⁃445.
[66] Naka M, Hashimoto K, Inoue A, et al.Corrosion⁃resistant amorphous Fe⁃C alloys containing chromium and/or molybdenum[J].Journal of Non⁃crystallin Solids, 1979, 31(3): 347⁃354.
[67] Hashimoto K, Asami K, Kawashima A, et al.The role of corrosion⁃ resistant alloying elements in passivity[J].Corrosion Science, 2007, 49(1): 42⁃52.
[68] Kobayashi A, Yano S, Kimura H, et al.Fe⁃based metallic glass coatings produced by smart plasma spraying process[J].Materials Science and Engineering B, 2008, 148(1⁃3): 110⁃113.
[69] Lu Y C, Clayton C R.An XPS study of the passive and transpassive behavior of Mo in deaerated 0.1M HCl[J].Corrosion Science, 1989, 29(8): 927⁃937.
[70] Jang H, Kwon H.In situ study on the effects of Ni and Mo on the passive film formed on Fe⁃20Cr alloys by photoelectrochemical and Mott⁃Schottky techniques[J].Journal of Electroanalytical Chemistry, 2006, 590(2): 120⁃125.
[71] Pardo A, Merino M C, Coy A E, et al.Pitting corrosion behaviour of austenitic stainless steels⁃combining effects of Mn and Mo additions[J].Corrosion Science, 2008, 50(6): 1796⁃1806.
[72] Tan M W, Akiyama E, Kawashima A, et al.The influences of Mo addition and air exposure on the corrosion behavior of amorphous Fe⁃8Cr⁃13P⁃7C alloy in de⁃aerated 1M HCl[J].Corrosion Science, 1996, 38(2): 349⁃365.
[73] Yaniv A E, Lumsden J B, Staehle R W.The composition of passive films on ferritic stainless steels[J].Journal of The Electrochemical Society, 1977, 124(4): 490⁃496.
[74] Marcus P.On some fundamental factors in the effect of alloying elements on passivation of alloys[J].Corrosion Science, 1994, 36(12): 2155⁃2158.
[75] Habazaki H, Kawashima A, Asami K, et al.The effect of molybdenum on the corrosion behavior of amorphous Fe⁃Cr⁃Mo⁃P⁃C alloys in hydrochloric acid[J].Materials Science and Engineering A, 1991, 134(91): 1033⁃1036.
[76] Hashimoto K, Asami K, Teramoto K.An X⁃ray photo⁃electron spectroscopic study on the role of molybdenum in increasing the corrosion resistance of ferritic stainless steels in HCl[J].Corrosion Science, 1979, 19(1): 3⁃14.
[77] Wranglen G.Pitting and sulphide inclusions in steel[J].Corrosion Science, 1974, 14(5): 331⁃349.
[78] Naka M, Hashimoto K, Masumoto T, High corrosion resistance of amorphous Fe⁃Mo and Fe⁃W alloys in HCl[J].Journal of Non⁃Crystalline Solids, 1978, 29(1): 61⁃65.
[79] Lloyd A C, Noel J J, McIntyre S, et al.Cr, Mo and W alloying additions in Ni and their effect on passivity[J].Electrochimica Acta, 2004, 49(17⁃18): 3015⁃3027.
[80] Tomashov N D, Chernova G P, Marcova O N.Effect of supplementary alloying elements on pitting corrosion susceptibility of 18Cr⁃14Ni stainless steel[J].Corrosion, 1964, 51: 166⁃176.
[81] Goetz R, Laurent J, Landolt D.The influence of minor alloying elements on the passivation behaviour of iron⁃chromium alloys in HCl[J].Corrosion Science, 1985, 25(12): 1115⁃1126.
[82] Habazaki H, Kawashima A, Asami K, et al.The effect of tungsten on the corrosion behavior of amorphous Fe⁃Cr⁃W⁃P⁃C alloys in HCl[J].Journal of The Electrochemical Society, 1991, 138(1): 76⁃81.
[83] Facchini L, Bruna P, Pineda E, et al.M?ssbauer characterization of an amorphous steel with optimal Mo content[J].Journal of Non⁃Crystalline Solids, 2008, 354(47⁃51): 5138⁃5139.
[84] Park K J, Kwon H S.Effects of Mn on the localized corrosion behavior of Fe⁃18Cr alloys[J].Electrochimica Acta, 2010, 55(9): 3421⁃3427.
[85] Zhang Y S, Zhu X M, Zhong S H.Effect of alloying elements on the electrochemical polarisation behavior and passive film of Fe⁃Mn base alloys in various aqueous solutions[J].Corrosion Science, 2004, 46(4): 853⁃876.
[86] Fang H, Hui X, Chen G.Effects of Mn addition on the magnetic property and corrosion resistance of bulk amorphous steels[J].Journal of Alloys and Compounds, 2008, 464(1⁃2): 292⁃295.
[87] Habazaki H, Kawashima A, Asami K, et al.The corrosion behavior of amorphous Fe⁃Cr⁃Mo⁃P⁃C and Fe⁃Cr⁃W⁃P⁃C alloys in 6M HCl solution[J].Corrosion Science, 1992, 23(12): 225⁃236.
[88] Bozzini B, DeGaudenzi G P D, Fanigliulo A, et al.Anodic behaviour of WC⁃Co type hardmetal[J].Materials and Corrosion, 2003, 54(5): 295⁃303.