参考文献
[1]Green M A.Photovoltaics:coming of age.Proceedings of the Photovoltaic Specialists Conference,Conference Record of the Twenty First IEEE,F,1990.IEEE.
[2]Chapin D M,Fuller C S,Pearson G L.A New silicon p-n junction photocell for converting solar radiation into electrical power.J Appl Phys,1954,25(5):676-677.
[3]Cusano D A.CdTe solar cells and photovoltaic heterojunctions in Ⅱ - Ⅵ compounds.Solid-State Electronics,1963,6(3):217-218.
[4]Alferov Z I,Andreev V,Garbuzov D,et al.Investigation of the influence of the AlAs-GaAs heterostructure parameters on the laser threshold current and the realization of continuous emission at room temperature.Sov Phys Semicond,1971,4:1573-1575.
[5]Carlson D E,Wronski C R.Amorphous silicon solar cell.Appl Phys Lett,1976,28(11):671-673.
[6]Kazmerski L L,White F R,Morgan G K.Thin film CuInSe2/CdS heterojunction solar cells.Appl Phys Lett,1976,29(4):268-270.
[7]Blakers A W,Green M A.20%efficiency silicon solar cells.Appl Phys Lett,1986,48(3):215-217.
[8]O'regan B,Gratzel M.A low-cost,high-efficiency solar cell based on dye-sensitized colloidal TiO2 films.Nature,1991,353(6346):737-740.
[9]Zhao J,Wang A,Green M A.24.5%Effciency silicon PERT cells on MCZ substrates and 24.7%effciency PERL cells on FZ substrates.1999.
[10]Green M A,Emery K,Hishikawa Y,et al.Solar cell efficiency tables(version 39).Progress in Photovoltaics:Research and Applications,2012,20(1):12-20.
[11]Ardani K,Margolis R,.2010 Solar technologies market report NREL.2011.
[12]Green M A,Emery K,Hishikawa Y,et al.Solar cell efficiency tables(version 37).Prog Photovoltaics,2011,19(1):84-92.
[13]King R R.40%efficient metamorphic GaInP/GalnAs/Ge multijunction solar cells.AppI Phys Lett,2007,90(18):183516.
[14]Repins I,Contreras M A,Egaas B,et al.19.9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2%fill factor.Prog Photovoltaics,2008,16(3):235-239.
[15]Katagiri H,Saitoh K,Washio T,et al.Development of thin film solar cell based on Cu2 ZnSnS4 thin films.Sol Energy Mater Sol Cells,2001,65(1-4):141-148.
[16]Grätzel M.Dye-sensitized solar cells.Journal of Photochemistry and Photobiology C:Photochemistry Reviews,2003,4(2):145-153.
[17]Grätzel M.Recent advances in sensitized mesoscopic solar cells.Accounts of Chemical Research,2009,42(11):1788-1798.
[18]Brown G F,Wu J.Third generation photovoltaics.Laser & Photonics Reviews,2009,3(4):394-405.
[19]Nozik A J.Quantum dot solar cells.Physica E:Low-dimensional Systems and Nanostructures,2002,14(1-2):115-120.
[20]Kamat P V.Quantum dot solar cells.semiconductor nanocrystals as light harvesters.The Journal of Physical Chemistry C,2008,112(48):18737-18753.
[21]Würfel P.Solar energy conversion with hot electrons from impact ionisation.Sol Energy Mater Sol Cells,1997,46(1):43-52.
[22]Konig D,Takeda Y,Puthen-Veettil B.Technology-compatible hot carrier solar cell with energy selective hot carrier absorber and carrier-selective contacts.Appi Phys Lett,2012,101(15):153901-153904.
[23]Conibeer G,Shrestha S,Shujuan H,et al.Hot Carrier solar cell absorbers:Superstructures,materials and mechanisms for slowed carrier cooling;proceedings of the Photovoltaic Specialists Conference(PVSC),2012 38th IEEE,F 3-8,2012.
[24]Katagiri H,Sasaguchi N,Hando S,et al.Preparation and evaluation of Cu2 ZnSnS4 thin films by sulfurization of E-B evaporated precursors.Sol Energy Mater Sol Cells,1997,49(1-4):407-414.
[25]Bag S,Gunawan O,Gokmen T,et al.Low band gap liquid-processed CZTSe solar cell with 10.1%efficiency.Energy Environ Sci,2012.
[26]Wang H.Progress in thin film solar cells based on Cu2ZnSnS4.International Journal of Photoenergy,2011.
[27]Zoppi G,Forbes I,Miles R W,et al.Cu2ZnSnSe4 thin film solar cells produced by selenisation of magnetron sputtered precursors.Progress in Photovoltaics:Research and Applications, 2009, 17 (5)315-319.
[28]Burgelman M,Nollet P,Degrave S.Modelling polycrystalline semiconductor solar cells.Thin Solid Films,2000,361-362(0):527-532.
[29]Degrave S,Burgelman M,Nollet P.Modelling of polycrystalline thin film solar cells:new features in SCAPS version 2.3;proceedings of the Photovoltaic Energy Conversion,2003 Proceedings of 3rd World Conference on,F 18-18,2003.
[30]Gloeckler M,Fahrenbruch A L,Sites J R.Numerical modeling of CIGS and CdTe solar cells:setting the baseline Proceedings of 3rd World Conference on Photovoltaic Energy Conversion,Vols a-C.Tokyo;Wcpec-3 Organizing Committee.2003:491-494.
[31]Suresh Babu G,Kishore Kumar Y B,Uday Bhaskar P,et al.Effect of Cu/(Zn+Sri)ratio on the properties of co-evaporated Cu2ZnSnSe4 thin films.Sol Energy Mater Sol Cells,2010,94(2):221-226.
[32]Liu M-L,Huang F-Q,Chen L-D,et al.A wide-band-gap p-type thermoelectric material based on quaternary chalcogenides of Cu2ZnSnQ4(Q=S,Se).Appl Phys Lett,2009,94(20):202103.
[33]Wang K,Gunawan O,Todorov T,et al.Thermally evaporated Cu2ZnSnS4 solar cells.Appl Phys Lett,2010,97(14):143508-143503.
[34]Fortunato E,Ginley D,Hosono H,et al.Transparent conducting oxides for photovoltaics.Mrs Bulletin,2007,32(03):242-247.
[35]Meng Y,Yang X,Chen H,et al.A new transparent conductive thin film ln2O3:Mo.Thin Solid Films,2001,394(1):218-222.
[36]Ginley D,Roy B,Ode A,et al.Non-vacuum and PLD growth of next generation TCO materials.Thin Solid Films,2003,445(2):193-198.
[37]Van Hest M F a M,Dabney M S,Perkins J D,et al.High-mobility molybdenum doped indium oxide.Thin Solid Films,2006,496(1):70-74.
[38]Meng Y,Yang X-L,Chen H-X,et al.A new transparent conductive thin film In2O3:Mo.Thin Solid Films,2001,394(1-2):218-222.
[39]Sun S Y,Huang J L,Lii D F.Investigation of the crystallization mechanisms in indium molybdenum oxide films by vacuum annealing.J Mater Res,2005,20(8):2030-2037.
[40]Gupta R,Ghosh K,Mishra S,et al.Structural,optical and electrical characterization of highly conducting Mo-doped In2O3 thin films.Appl Surf Sci,2008,254(13):4018-4023.
[41]Yoshida Y,Gessert T,Perkins C,et al.Development of radio-frequency magnetron sputtered indium molybdenum oxide.Journal of Vacuum Science & Technology A:Vacuum,Surfaces,and Films,2003,21(4):1092-1097.
[42]Yoshida Y,Wood D M,Gessert T A,et al.High-mobility,sputtered films of indium oxide doped with molybdenum.Appl Phys Lett,2004,84(12):2097-2099.
[43]Li X,Miao W,Zhang Q,et al.Preparation of molybdenum-doped indium oxide thin films using reactive direct-current magnetron sputtering.J Mater Res,2005,20(06):1404-1408.
[44]Seo D J,Park S H.Structural,electrical and optical properties of In2O3:Mo films deposited by spray pyrolysis.Physica B:Condensed Matter,2005,357(3):420-427.
[45]Prathap P,Gowri Devi G,Subbaiah Y P V,et al.Preparation and characterization of sprayed In2O3:Mo films.physica status solidi(a),2008,205(8):1947-1951.
[46]Meng L,Dos Santos M.Properties of indium tin oxide(ITO)films prepared by rf reactive magnetron sputtering at different pressures.Thin Solid Films,1997,303(1):151-155.
[47]Kaleemulla S,Madhusudhana Rao N,Girish Joshi M,et al.Electrical and optical properties of In2O3:Mo thin films prepared at various Mo-doping levels.Journal of Alloys and Compounds,2010,504(2):351-356.
[48]Meng Y,Yang X-L,Chen H-X,et al.Molybdenum-doped indium oxide transparent conductive thin films.Journal of Vacuum Science & Technology A:Vacuum,Surfaces,and Films,2002,20(1):288-290.
[49]Young D,Coutts T,Kaydanov V.Density-of-states effective mass and scattering parameter measurements by transport phenomena in thin films.Review of Scientific instruments,2000,71(2):462-466.
[50]Kuo C,Liu C,Lin C,et al.Effects of oxygen flow rate on microstructure and properties of indium molybdenum oxide films by ion beam-assisted deposition.Vacuum,2008,82(5):441-447.
[51]Shigesato Y,Hayashi Y,Haranoh T.Doping mechanisms of tin-doped indium oxide films.Appl Phys Lett,1992,61(1):73-75.
[52]George J,Menon C S.Electrical and optical properties of electron beam evaporated ITO thin films.Surface and Coatings Technology,2000,132(1):45-48.
[53]Warmsingh C,Yoshida Y,Readey D,et al.High-mobility transparent conducting Mo-doped InO thin films by pulsed laser deposition.J Appl Phys,2004,95(3831).
[54]Kim H,Piqué A,Horwitz J S,et al.Effect of aluminum doping on zinc oxide thin films grown by pulsed laser deposition for organic light-emitting devices.Thin Solid Films,2000,377-378(0):798-802.
[55]Elangovan E,Marques A,Fernandes F,et al.Preliminary studies on molybdenum-doped indium oxide thin films deposited by radio-frequency magnetron sputtering at room temperature.Thin Solid Films,2007,515(13):5512-5518.
[56]Wibowo R A,Kim W S,Lee E S,et al.Single step preparation of quaternary Cu2ZnSnSe4 thin films by RF magnetron sputtering from binary chalcogenide targets.J Phys Chem Solids,2007,68(10):1908-1913.
[57]Kumar Y,Babu G S,Bhaskar P U,et al.Effect of starting-solution pH on the growth of Cu2ZnSnS4 thin films deposited by spray pyrolysis.physica status solidi(a),2009,206(7):1525-1530.
[58]Chen S,Gong X G,Walsh A,et al.Crystal and electronic band structure of Cu2ZnSnX4(X=S and Se)photovoltaic absorbers:First-principles insights.Appl Phys Lett,2009,94(4):041903.
[59]Barkhouse D a R,Gunawan O,Gokmen T,et al.Device characteristics of a 10.1%hydrazine-processed Cu2ZnSn(Se,S)4 solar cell.Progress in Photovoltaics:Research and Applications,2011,20(1):6-11.
[60]Ito K,Nakazawa T.Electrical and optical properties of stannite-type quaternary semiconductor thin films.Jpn J Appl Phys,1988,27(part 1):2094-2097.
[61]Seol J S,lee S Y,Lee J C,et al.Electrical and optical properties of Cu2ZnSnS4 thin films prepared by RF magnetron sputtering process.Sol Energy Mater Sol Cells,2003,75(1-2):155-162.
[62]Zhang J,Shao L,Fu Y,et al.Cu2ZnSnS4 thin films prepared by sulfurization of ion beam sputtered precursor and their electrical and optical properties.Rare Metals,2006,25(6,Supplement 1):315-319.
[63]Salomé P M P,Fernandes P A, Da Cunha A F.Morphological and structural characterization of Cu2 Zn-SnSe4thin films grown by selenization of elemental precursor layers.Thin Solid Films,2009,517(7):2531-2534.
[64]Katagiri H,Jimbo K,Yamada S,et al.Enhanced conversion efficiencies of Cu2ZnSnS4-based thin film solar cells by using preferential etching technique.Appl Phys Express,2008,1(4).
[65 Friedlmeier T M,Wieser N,Walter T,et al.Heterojunctions based on Cu2ZnSnS4 and Cu2ZnSnSe4 thin films,F,1997.
[66]Araki H,Mikaduki A,Kubo Y,et al.Preparation of Cu2ZnSnS4 thin films by sulfurization of stacked metallic layers.Thin Solid Films,2008,517(4):1457-1460.
[67]Babu G S,Kumar Y B K,Bhaskar P U,et al.Growth and characterization of co-evaporated Cu2ZnSnSe4 thin films for photovoltaic applications.Journal of Physics D:Applied Physics,2008,41 (20):205305.
[68]Weber A,Krauth H,Pert S,et al.Multi-stage evaporation of Cu2ZnSnS4 thin films.Thin Solid Films,2009,517(7):2524-2526.
[69]Volobujeva O,Raudoja J,Mellikov E,et al.Cu2ZnSnSe4 films by selenization of Sri-Zn-Cu sequential films.J Phys Chem Solids,2009,70(3-4):567-570.
[70]Scragg J J,Dale P J,Peter L M.Towards sustainable materials for solar energy conversion:preparation and photoelectrochemical characterization of Cu2ZnSnS4.Electrochem Commun,2008,10(4):639-642.
[71]Chan C,Lam H,Surya C.Preparation of Cu2ZnSnS4 films by electrodeposition using ionic liquids.Sol Energy Mater Sol Cells,2010,94(2):207-211.
[72]Li J, Ma T, Wei M, et al.The Cu2 ZnSnSe4 thin films solar cells synthesized by electrodeposition route.Appl Surf Sci,2012,258(17):6261-6265.
[73]Nakayama N,Ito K.Sprayed films of stannite Cu2ZnSnS4.Appl Surf Sci,1996,92:171-175.
[74]Kamoun N,Bouzouita H, Rezig R.Fabrication and characterization of Cu2 ZnSnS4 thin films deposited by spray pyrolysis technique.Thin Solid Films,2007,515(15):5949-5952.
[75]Tanaka K,Moritake N,Uchiki H.Preparation of Cu2ZnSnS4 thin films by sulfurizing sol-gel deposited precursors.Sol Energy Mater Sol Cells,2007,91(13):1199-1201.
[76]Moritake N,Fukui Y,Oonuki M,et al.Preparation of Cu2ZnSnS4 thin film solar cells under non-vacuum condition.physica status solidi(c),2009,6(5):1233-1236.
[77]Tanaka K, Fukui Y, Moritake N,et al.Chemical composition dependence of morphological and optical properties of Cu2ZnSnS4 thin films deposited by sol-gel sulfurization and Cu2ZnSnS4 thin film solar cell efficiency.Sol Energy Mater Sol Cells,2011,95(3):838-842.
[78]Tanaka T,Sueishi T,Saito K,et al.Existence and removal of Cu2Se second phase in coevaporated Cu2Zn-SnSe4 thin films.J Appl Phys,2012,111(5):053522.
[79]Juškénas R,Kanapeckaité S,Karpavičiené V,et al.A two-step approach for electrochemical deposition of Cu-Zn-Sn and Se precursors for CZTSe solar cells.Sol Energy Mater Sol Cells,2012,101(0):277-282.
[80]Fernandes P A,Salomé P M P,Cunha A F D.Precursors'order effect on the properties of sulfurized Cu2Zn-SnS4 thin films.Semicond Sci Technol,2009,24(10):105013.