Flashing your device

Once your device is successfully detected and installed, you need to flash your device with the Linux image. For this we'll use the flash tool provided by Intel:

1. Open the flash lite tool and connect your device to the PC:

1. Once the flash tool is opened, click on Browse... and browse to the .zip file of the Linux image you have downloaded.
2. After you click on OK, the tool will automatically unzip the file.

1. Next, click on Start to flash:

1. You will be asked to disconnect and reconnect your device. Do this, and the board should start flashing. It may take some time before the flashing is completed. Don't tamper with the device during this process.
2. Once the flashing is completed, we can configure the device: