5.2　Products

5.2.1　The product specifications for rolling mills of different types，in different specifications and compositions can be determined according to the specification range listed in the following table 5.2.1，and the product thickness，minimum width of steel strip，and coil weight in unit width can be adjusted appropriately according to the conditions of product varieties，material supply，and equipment configuration，etc.

Table 5.2.1　Product specification range of rolling mills of different types，in different specifications and compositions

Note:1　A=130-150mm.
2　The unit weight of coil shall be determined to meet a criterion that the height-width ratio of coil is smaller than 2.5.

5.2.2　The quality of the products employed in the design shall meet the requirements of article 4.2.4 in this code.