更新时间：2024-07-31 17:28:53
封面
版权信息
插图
自序
前言
出版说明
第1篇 “铸造及凝固过程建模与仿真”代表性学术论文
综述论文
1.3D Modeling and Simulation of Dendritic Growth during Solidification
2.铸造过程的多尺度模拟研究进展
3.Phase-field simulation of solidification in multicomponent alloys coupled with thermodynamic and diffusion mobility databases
4.Advances in Multi-scale Modeling of Solidification and Casting Processes
5.汽车工业镁合金压铸成形技术及模拟仿真
6.Simulation and experimental validation of three-dimensional dendrite growth
航空及重燃叶片建模与仿真
7.MODELING OF DIRECTIONAL SOLIDIFICATION PROCESS OF SUPERALLOY TURBINE BLADE CASTINGS
8.Numerical Simulation of Solidification Process on Single Crystal Ni-Based Superalloy Investment Castings
9.Modeling of Grain Selection during Directional Solidification of Single Crystal Superalloy Turbine Blade Castings
10.NUMERICAL SIMULATION OF TEMPERATURE FIELD IN DIRECTIONAL SOLIDIFICATION OF TURBINE BLADE BY LIQUID METAL COOLING METHOD
11.Multiscale Modeling and Simulation of Directional Solidification Process of Turbine Blade Casting with MCA Method
12.Numerical Simulation and Optimization of Directional Solidification Process of Single Crystal Superalloy Casting
13.Deformation and recrystallization of single crystal nickel-based superalloys during investment casting
14.Numerical simulation of dendrite growth in nickel-based superalloy and validated by in-situ observation using high temperature confocal laser scanning microscopy
15.A model for simulation of recrystallization microstructure in single-crystal superalloy
轻量化材料工艺建模与仿真
16.Preliminary Study on Simulation of Microporosity Evolution and Fatigue Life of Aluminum Alloy Casting
17.Processing Technology and Mechanical Properties of Die-Cast Magnesium Alloy AZ91D
18.Influences of Casting Pressure Conditions on the Quality and Properties of a Magnesium Cylinder Head Cover Die Casting
19.Numerical Modeling of Microstructure Evolution and Dendrite Growth for Al-Si Alloy Casting during Low Pressure Die Casting
20.Dendrite growth modelling of cast magnesium alloy
21.Simulation of Magnesium Alloy AZ91D Microstructure Using Modified Cellular Automaton Method
22.Cellular automaton simulation of three-dimensional dendrite growth in Al-7Si-Mg ternary aluminum alloys
23.A phase field model for simulating the precipitation of multi-variant β-Mg17 Al12 in Mg-Al-based alloys
大型铸件及钢锭建模与仿真
24.Instability of Fluid Flow and Level Fluctuation in Continuous Thin Slab Casting Mould
25.A Coupled Electrical-Thermal-Mechanical Modeling of Gleeble Tensile Tests for Ultra-High-Strength (UHS) Steel at a High Temperature
26.Cellular Automaton Modeling of Austenite Nucleation and Growth in Hypoeutectoid Steel during Heating Process
27.Deformation Prediction of a Heavy Hydro Turbine Blade During the Casting Process with Consideration of Martensitic Transformation
28.Modeling of Species Transport and Macrosegregation in Heavy Steel Ingots
29.Experimental Measurements for Numerical Simulation of Macrosegregation in a 36-Ton Steel Ingot
30.Three-Dimensional Simulation of Macrosegregation in a 36-Ton Steel Ingot Using a Multicomponent Multiphase Model
31.Analysis of internal crack in a six-ton P91 ingot
第2篇 学术会议报告
国际会议
1.Experience on Modeling of Casting and Solidification Processes（铸造及凝固过程建模研究经验）
2.Progress on Multi-scale Modeling of Solidification Process of Advanced Casting Technology（先进铸造技术凝固过程的多尺度建模研究进展）
3.Numerical Simulation of Macrosegregation in Large Steel Ingot with Multicomponent and Multiphase Model（基于多成分和多相模型对大型钢锭中宏观偏析进行数值模拟研究）
4.Multiscale Modeling and Simulation of Directional Solidification Process of Ni-based Superalloy Turbine Blade Casting（镍基高温合金涡轮叶片铸件定向凝固过程的多尺度建模与仿真研究）
国内会议
5.建模与仿真在装备制造中的作用与前景
6.高温合金定向凝固叶片铸件凝固过程建模与仿真进展
第3篇 制造业发展及制造强国战略研究论文
1.发展资源节约环境友好的先进制造技术
2.《中国制造2025》——建设制造强国之路
3.数字化设计与制造是智能制造关键共性技术
4.创新·强基·智能——建设制造强国
第4篇 战略研究会议报告
1.Trend of Advanced Manufacturing Technology（先进制造技术发展趋势）
2.Status and Forecast of China Manufacturing Industry（中国制造业的现状及展望）
3.CHINA MANUFACTURING 2025——An Action Program for Strong Manufacturing Industry（《中国制造2025》——建设制造强国行动纲领）
4.Developing Intelligent Manufacturing——For a Strong Manufacturing Industry（发展智能制造——建设制造强国）
5.Modeling and Simulation——Key Technology for Digital Transformation of Manufacturing Industry（建模与仿真——制造业数字化转型关键技术）
6.我国制造业科技发展战略
7.提高装备制造业自主创新能力
8.创新驱动 强化基础——建设制造强国
9.加强先进基础工艺创新能力
第5篇 留学情结与学术人生
1.“中国留学生的四十年”之柳百成：新留学潮开启的见证者
2.改革开放四十年之亲历者记柳百成：留学岁月照亮我的人生
3.西风千里话转折 水木数载铸人生——柳百成院士的学术人生
4.怀念南翔同志 学习南翔同志
5.顽强拼搏、报效祖国
第6篇 祝贺与回忆
1.“中国铸造杰出贡献奖”颁奖词
2.“中国铸造终身成就奖”颁奖词
3.桃李缘——贺导师柳百成院士清华任教60周年
4.跟着先生学知识学做人
5.久违的回忆
6.科学严谨治学、厚德载物育人——写在柳百成先生从教60周年之际
7.教书育人，勇攀科技高峰
8.贺柳老师执教六十年
9.李文胜博士回忆
附录 赴国外及中国港澳台地区参加重要学术交流活动表（1978—2019）
